53 Posts - 24 Topics - 18 Members


Welcome, Guest.
Please login or register.
Forgot your password?


Advanced Search

Recent Posts

Custom JG Bar-10 Build by NoahManceaux
July 22, 2019, 12:19:25 PM

Re: Colt M4a1 Block II by Divided_Sloth
April 05, 2019, 12:35:07 PM

Re: G&P 11.1v 2500mah 20c lipo by imthenerfherder
April 01, 2019, 06:06:34 AM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - imthenerfherder

Pages: [1]
Gear B/S/T section / Re: G&P 11.1v 2500mah 20c lipo
« on: April 01, 2019, 06:06:34 AM »
I can verify the battery is in almost new condition.   It's a beastly battery!

Gun B/S/T section / Re: Colt M4a1 Block II
« on: January 03, 2019, 03:20:11 PM »
Thanks boo

Gun B/S/T section / Re: Colt M4a1 Block II
« on: January 02, 2019, 12:53:25 PM »
Those hot boi OG trades

Gun B/S/T section / Re: Colt M4a1 Block II
« on: January 02, 2019, 12:52:36 PM »
Right side

Gun B/S/T section / Re: Colt M4a1 Block II
« on: January 02, 2019, 12:49:22 PM »
Left side

Gun B/S/T section / Colt M4a1 Block II
« on: January 02, 2019, 12:47:41 PM »
Colt Block II
Shooting right at 390 fps, optimized for semi use, as the fet is programmed for peak trigger response with both 7.4v and 11.1v lipo batteries.  Selector positions are safe, semi (7.4v), semi (11.1v).  If you’re looking for that next milsim ready build that’s nearly kosher for those SOF kits, this is the gun for you.

Externals:  Body, optic, and rail show use, but are in 80% condition or better
King arms M4a1 Body with the OG colt trades, discontinued.          $200
Daniel Defense Licensed RISII rail system                   $135
Tan Crane stock                           $10
Broom handle vertical grip                        $10
VFC QRF grip                              $27
KAC licensed iron sights                        $27
VFC V3X light                              $49
G&P selector                              $10
Daniel Defense 14.5 outer barrel                      $48
Eotech EXPS 3-2 replica, with sight protector               $64

TOTAL:                              $580

Internals: All are brand new, just installed.
VFC QCS gearbox shell                        $35
Siegetek 20:1 gears                           $135
BTC Spectre MkII Bluetooth                        $115
ASG 28TPA motor                           $60
SHS piston                              $12
SPEED piston head                           $25
Lonex tappet plate                           $9   
Lonex Cylinder head                           $12
Lonex m4 nozzle                           $9   
Lonex V2 springs                           $9
Modify ceramic bearings                        $30
SHS PTFE full cylinder                        $10
Guarder SP110 spring                        $13

Labor, includes parts installed, AOE correction, gears shimmed, tuning      $150

TOTAL:                              $625

Barrel set up:
Lonex hop up chamber                        $15
Prometheus blue bucking                           $15
ZCI 6.02x363 inner barrel                        $25
Flat hop                              $20

TOTAL:                              $75
Grand Total:                              $1280
Asking $750, which is under 60% of the retail.
I finished building the gearbox and barrel set up last night, 1/1/19.  Shooting vid and Chrono pics available upon request.  Price is for local meet up, I'm in Baton Rouge, but frequent the Northshore.  If I need to ship it, please add $50, as I insure all of my packages for the full retail amount.  Last time I shipped a fully build gun, the shipping was $40 for the shipping and $1000 worth of insurance.
Why so cheap?  A lot of this stuff I acquired over months, most of which I didn't pay full price for, so why should you?  If this build doesn't tickle your fancy, or if you're looking to get your own gun overhauled, send me a PM.  Don't think this gun is worth the cost? Prove it.  Build one for cheaper, then tell me your secrets!

Airsoft Tech area / Re: Hop Up units??
« on: January 02, 2019, 12:29:51 PM »
Hey Raptor, I've got first hand experience with on of the older gen Maxx units, the PRO version.  In my opinion, and experience, the MAXX units are overpriced for what they offer.  My intent was to flat hop a bucking, and drop it in, but even at the highest setting, zero hop with 0.20s.  That was no bueno since I use .32s.  Swapped to an untouched maple leaf bucking, and the MAXX nub, it could barely lift .25s.  The unit I have is an older one, and the newer units do seem to fix this issue, but for $60, I can get nearly 3 lonex units and it does the same thing.  I know I'm ragging on MAXX, but there are positives.  They are machined really well, the quality is great.  They are LED ready which makes tracer bbs glow brighter, for longer. 

If you're looking for just a solid hop up unit, and aren't interested in having tracer bbs, there are on par options for less than what the MAXX units go for.  I would not use any of the new prowin units instead of being cnc'd, they are now cast, which is causing issues.  Stick with Lonex, Retro arms, or even the stock unit if its not broken or having sealing issues.  My 416 upper with an edgi barrel sends .45s past 250 feet with a stock VFC hop up unit.

Introductions / Re: Newbie Here!
« on: December 31, 2018, 08:26:34 AM »
Another BR resident!
Gunfighter in Mandeville has a great selection, and its the largest proshop in the gulf south.  Woody will help steer you in the right direction.

Introductions / Re: Yut yut in yo butt
« on: December 31, 2018, 08:12:10 AM »
Hello there

Forum information / Re: Forum Suggestions
« on: December 24, 2018, 07:41:13 PM »
I think a teching sub category would be fantastic.  People will always ask about what parts they should use, and who are reliable techs in the area.

Introductions / Hello!
« on: December 24, 2018, 07:36:21 PM »
Hi! I'm the nerf herder, and I herd nerfs.  My name is Stephen, and I run the games at LA Xtreme, I'm the head airsoft tech at Gunfighter pro shop.  I've been playing since 2005, and teching since 2011.  I build custom guns from the ground up for a reasonable rate that isn't umbrella pricing.  Got a gun that needs working on? I've worked on hundreds of peoples guns, and have experience with just about every model of gun thats available. 

Pages: [1]
Powered by EzPortal